Hydraulic oil cooling machine/chiller water cooler
BS-08/10/12/15-AS/AD
About the unit
The term "portable air-cooled chillers" refers to the basic configuration of the system, uses a single closed-loop design for the pressurized refrigerant. The term refers to any chiller system that contains all of the necessary components - the refrigeration circuit, the reservoir, and the pump or pumps - within a single footprint.
The portable air-cooled chillers are used for controlled cooling of products, mechanisms, and factory machinery in a wide range of industries, including plastic injection and blow molding industry. The industrial chillers assist to improve production efficiency and minimize the rejection ratio of finished products.
Feature
- Compressor: Adopt the Copeland / Danfoss / Panasonic scroll compressor.
- Condenser: Adopt upper-blow cooler, double air blow the best cooling effect.
- Evaporator: Adopt coil type / shell & tube / pleated exchanger type evaporator. High performance of evaporate completely the refrigerant for chilling water.
- Pump: High-flow pump in smooth operation with minimum noise and no leakage.
- Control system: Schneider or another famous brand Electric part. Adopt the PID control system which can be remote controlled and support to output the alarm message.
- Outlook designing: Compact construction, low gravity, no leakage to keep manufacturing plant dry and clean.
- High precision ±1°C controlled.
Available option
- RS 485 communication function for remote control
- PLC control system and touch screen
- Indoor type / Stainless steel frame
- Power supply : 220V / 380V / 415V / 460V, 50/60Hz
Function security
- ON/OFF- Main power switch
- Non-fuse circuit breaker
- H/L switch
- Power reverse phase protection switch
- Anti-freezing protection
- Compressor overload protection
- Chilling water pump overload protection
- Fan motor overload protection
- Failure indicator system
- Failure alarm system
- Chilling water by-pass circuit
- Multi-unit delay start control
Application
- Plastic
- Leaser
- Chemical
- Printing & Laminating
- Machine tool
- Laboratory
- Industrial process
- Packing
- Food
- Roll
- Packing
- Food
- Rubber
Specification
| Model / Parameter | BS-10AD | ||
| Cooling capacity | KW | 25.2 | |
| kcal/h | 21.7 | ||
| TR | 71.7 | ||
| Consumed power | KW | 10.3 | |
| Running Amp | A | 20.7 | |
| Refrigerant | Type | - | R22 / 407C |
| Control type | - | Thermal expansion valve | |
| Compressor | Type | - | Scroll compressor |
| Power | KW | 8.1 | |
| Quantity | Set | 2 | |
| Operation current | A | 16.3 | |
| Condenser | Type | - | Internal thread finned type heat exchanger |
| Cooling Fan Qty | Set | 2 | |
| Single Fan Power | KW | 0.55 | |
| Air Volume | M3/h | 12000 | |
| Evaporator | Type | - | Highly efficient heat exchanger brass shell and tube |
| Medium | - | Water | |
| Pipe connection | - | DN25 | |
| Water flow rate | M3/h | 5 | |
| Water pump | Pump power | KW | 1.1 |
| Pump head | m | 20 | |
| Water tank | Type | / | Stainless steel water tank |
| Volume | L | 120 | |
| Safety protection | - | High-voltage protection, frost protection, safety valve, overload protection, phase reverse phase protection, under-voltage overcurrent protection | |
| Out dimension | Length | mm | 1600 |
| Width | mm | 850 | |
| Height | mm | 1540 | |
| Total weight | KG | 350 | |
Note:
- The conditions: chilled water inlet temperature 12 ºC, the outlet temperature 7ºC, air temperature 35 ºC ;
- Power Supply: 3PH-380V-50Hz, allowing voltage fluctuation ± 10%, Allow the voltage difference ± 2%.
- The specification is subject to change due to product improvement without prior notice.
