Two-way refrigeration combined screw compressor air-cooled industrial chiller

Packaged Type Screw Compressor Air Cooled Industrial Water Chiller With Two Refrigeration Circuit As a leading air cooled screw chiller supplier,MGREENBELT provides a complete range of air-cooled screw chiller,  with cooling capacity from 20Ton to 150Ton/80KW to 530KW and the chiller temperature control

Featured Products


Packaged Type Screw Compressor Air Cooled Industrial Water Chiller With Two Refrigeration Circuit 
As a leading air cooled screw chiller supplier,MGREENBELT provides a complete range of air-cooled screw chiller,  with cooling capacity from 20Ton to 150Ton/80KW to 530KW and the chiller temperature control range is +30ºC to -30ºC.
Besides the standard air-cooled screw chiller control temperature of 7ºC to 25ºC, MGREENBELT also has air-cooled glycol screw chiller control temperature below zero from 0ºC to -30ºC.

Water Chiller General Introduction

(1). Outlet water temeprature: -10 C° to 30C°
(2). Power Supply: 3PH-380V-50Hz, or based on user local need.
(3).  Refrigerant: R22 / R407c / R134a / R404a .
(4). Chiller Cooling Capacity: 20 ton ~ 150 tons
(5). Semi-hermetic screw type compressor
(6). Air-cooled type condenser
(7). Closed loop shell and tube evaporator
(8). No need to install a cooling tower

Packaged Type Screw Compressor Air Cooled Industrial Water Chiller with Two Refrigeration Circuit
MGREENBELT Water Chiller Features
Packaged Type Screw Compressor Air Cooled Industrial Water Chiller with Two Refrigeration CircuitPackaged Type Screw Compressor Air Cooled Industrial Water Chiller with Two Refrigeration Circuit
Hanbell / Bitzer/Fusheng Compressor 
New screw type compressor with 20%-30% higher in efficiency.
Cooling capacity control available at four steps (100%-75%-50%-25%), three steps (100%-66%-33%) or no steps control system.
High efficiency, low noise and vibration, easy to install.
Environmental protection refrigerant R134a, R407c available.
Packaged Type Screw Compressor Air Cooled Industrial Water Chiller with Two Refrigeration CircuitPackaged Type Screw Compressor Air Cooled Industrial Water Chiller with Two Refrigeration Circuit
Heat exchanger
Shell and tube evaporator, high efficiency and cleanable(plat type available on request.
Aluminum fin type condenser with adequate heat exchanging surface.
Refrigeration solenoid valve, to protect compressor when stop.
Refrigerant sight glass, to further monitor the refrigerant status in the system, so to check the unit running status.
Packaged Type Screw Compressor Air Cooled Industrial Water Chiller with Two Refrigeration Circuit
Microcomputer Control System Or  PLC Control System
The intelligent control system of microcomputer is precisely controlled, Simple operation, intelligent start and stop, Precision temperature control within 5 to 45 degrees of arbitrary adjustment, LCD display, all kinds of faults at a glance, Monitor ingends in real time, Multiple protection features, The Chinese and English interface sits to switch, To meet the needs of different users, Easy to operate.

Schneider Electrical Systems
Protection system built-in compressor superload protector, circulating water pump superload, system high and low pressure protector, compressor start electronic time delay, German SIEMENS electronic products, with a sound electrical protection system.
Unit Safety Protection
Compressor internal protection
Over current protection
High/low pressure protection
High discharge temperature alarm
Over temperature protection 
Flow switch
Phase sequence/phase missing protection
Anti freezing protection 


Specification for air cooled water chillers

Air Cooled Screw Water Chiller( Single Compressor)
ModelMG-30CSMG-40CSMG-50CSMG-60CSMG-80CSMG-100CSMG-120CSMG-150CSMG-180CS
Cooling CapacityTons22.231.040.443.258.372.587.6114.9133.6
Kcal/h6708093740122120130720176300219300264880347440404200
KW78109142152205255308404470
Power3PHASE-380V-50HZ
RefrigerantTypeR22
Control TypeThermostatic expansion valve
CompressorTypesemi-closed screw type
Power(kw)28384752688397124146
Start modeY-
Capacity range25%-50%-75%-100%
EvaporatorTypeShell and tube type
Flow(m³/h)131924263544536981
Inlet/outletDN65DN65DN80DN80DN80DN80DN80DN100DN100
CondenserTypeV type Finned Copper tube with Low noise air fans
Air Flow(m³/h)2700040000500006000080000100000120000150000180000
DimensionL(mm)235032003200330033004400385047505850
W(mm)145014501450230023002300220022002200
H(mm)215021502150240024002400235024502450
Weightkg180019002300248032003800330040005000
Data above based on the below condition:
  1. Inlet water temperature 12°C, outlet water temperature 7°C, ambient temperature 35 °C
  2. Working condition:The chilled water range: 5ºC to 30ºC. It is better to run the chiller in the ambient temperature at or below 40ºC.
Air Cooled Screw Chiller Series( Twin System)
ModelMG-60CSMG-80CSMG-100CSMG-120CSMG-160CSMG-200CS
Cooling CapacityTons44.4628186.7116.3144.7
Kcal/h134160187480245100262300351740437740
KW156218285305409509
Power supply3PH-380V-50HZ
RefrigerantTypeR22
ControlThermostatic expansion valve
CompressorTypeSemi-hermetic
Power(kw)567594103135166
StartY-
Capacity control25%-50%-75%-100%
EvaporatorTypeShell and tube
Water flow(m³/h)273749527087
Dia.of inlet/outletDN80DN80DN100DN100DN100DN125
CondenserTypeInner screw red copper tube covered in aluminum fins
Air cooling flow(m³/h)6000080000100000120000160000200000
Protection SystemCompressor overheat protection, high/low pressure protection,phase missing/sequence protection,flow rate protection, anti-frozen protection.
DimensionL330033004400520066008800
W230023002300230023002300
H240024002400250025002500
Weight(kg)248032003800525062007800
Data above based on the below condition:
  1. Inlet water temperature 12°C, outlet water temperature 7°C, ambient temperature 35 °C
  2. Working condition:The chilled water range: 5ºC to 30ºC. It is better to run the chiller in the ambient temperature at or below 40ºC.

Images chillers
Packaged Type Screw Compressor Air Cooled Industrial Water Chiller with Two Refrigeration Circuit
Packaged Type Screw Compressor Air Cooled Industrial Water Chiller with Two Refrigeration Circuit

Application Industry
Air cooled screw chillers are also widely used in plastic processing and plastic machinery including: plastic injection molding, plastic extruders and extrusion line, blowing molding machine.
It can precisely control the exactly temperature , which requested by the modernized machinery production, and greatly improved the production efficiency and product quality. MGREENBELT Industrial chiller is a good partner for the modernized industry , which feather as easy to operate with reasonable design, high quality and complete range of specifications. 
Packaged Type Screw Compressor Air Cooled Industrial Water Chiller with Two Refrigeration Circuit
Packaged Type Screw Compressor Air Cooled Industrial Water Chiller with Two Refrigeration Circuit
MGREENBELT Our Company

Mgreenbelt Chillers has an outstanding long history for providing cooling solutions to the plastic injection cooling Industry. From 2.85 to 2015KW cooling capacity, we provide specific solution to satisfy variety of requirements. When your system requires cooling, we have the solution.  

We are a quality cooperative partner in business,and also are the long term friendship relation,so please do keep in touch with us,even though you have make the order or will make the order,thanks.
Packaged Type Screw Compressor Air Cooled Industrial Water Chiller with Two Refrigeration Circuit
Service Team

A. 14 Months warranty and life time technical maintenance offered.
B. All extra parts for the machine can be purchased with agent price from Mgreenbelt
C. 24 Hours working phone call/Email/Skype/MSN/Wechat/Whatsapp/Trade manager online to support.
D. Professional technical team and sales person give you regarding troubleshooting procedures via Internet and Phone any time when needed.
E. Free and Professional Training at our Factory under the relaxed condition


FAQ

Q:How to choose a right chiller model?
A:Please make sure the details as follow:
When you send the inquiry to us, pls kindly send it with below technical  information.
1)water chiller type: Air cooled or water cooled
2)Cooling capacity:       _____    Kcal/hr  or   _____KW
3)Refrigerant:  R22 or others friendly R410A, R407C
4) Voltages and Frequency :   ______V/PH/HZ

Q: How to quote a accurate solution for you?
A: After make sure the cooling capacity,please inform us:

1.What's the power supply need? Phase/Voltage/Frequency.
2.What's the refrigerant need? R22/R407C/R410A/R134A and etc.


Application industry chillers

If this  water chiller not suitable for your working need, we have different chiller series, please choose it as follows. 
-Commercial Water Cooled Chiller
-Scroll type water cooled water chiller
-Screw type water cooled water chiller
-Flooded type water cooled water chiller
 
-Commercial Air Cooled Chiller
-Scroll type air cooled water chiller
-Screw type air cooled water chiller
 
-Industrial Chiller
-Air cooled industrial chiller
-Water cooled industrial chiller
-Glycol chiller 

As a professional industrial chiller manufactuer and solution provider , we can supply kinds of chillers to meet your different cooling requirement, if the chillers above is not workable for you, please feel free send needs to us directly.
MGREENBELT Contact Person: Libra Zhang

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours